[Jan 06, 2022] DES-DD33 Test Prep Training Practice Exam Questions Practice Tests [Q18-Q42]

Share

[Jan 06, 2022] DES-DD33 Test Prep Training Practice Exam Questions Practice Tests

Exam Questions Answers Braindumps DES-DD33 Exam Dumps PDF Questions


EMC DES-DD33 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Monitor PowerProtect DD capacity and estimate storage burn rate
  • PowerProtect DD Concepts and Features
Topic 2
  • Implement Dell EMC Data Domain system with key protocols, including NFS/CIFS, DD Boost, VTL, and NDMP
  • PowerProtect DD Implementation in Backup Environments and Integration with Application Software
Topic 3
  • Explain the key differentiators of the Dell EMC PowerProtect DD deduplication technology
  • Backup environments including integrated Dell EMC PowerProtect DD systems
Topic 4
  • Describe key information points for a backup and recovery solution using DD Boost/OST technology
  • Monitor system activity and performance and evaluate the cleaning frequency
Topic 5
  • Implement Dell EMC PowerProtect DD system with key technologies, including data security
  • Perform administrative tasks on Dell EMC PowerProtect DD systems with the Dell EMC Cloud Tier

 

NEW QUESTION 18
An administrator monitors the performance statistics of a PowerProtect DD appliance. Low disk-write rates are shown, and the network inbound traffic is high.
What is the most likely cause of this behavior?

  • A. Known segments
  • B. Disk failure
  • C. Expired segments
  • D. NVRAM failure

Answer: A

 

NEW QUESTION 19
What is the correct sequence of operations used by the PowerProtect DD DIA in the end-to-end verification process?

Answer:

Explanation:

 

NEW QUESTION 20
Backup administrators have noticed slow backups on the AIX environment.
To fix the issue, what should the set large_send be for each NIC, and what should the NFS option be set to?

  • A. yes and nfs_rfc1323=1
  • B. yes and nfs_rfc1323=0
  • C. no and nfs_rfc1323=1
  • D. no and nfs_rfc1323=0

Answer: A

 

NEW QUESTION 21
Where is the DD System Manager can the status of chassis components be found?

  • A. Hardware > Chassis
  • B. Home > Chassis
  • C. Health > Chassis
  • D. Maintenance > Chassis

Answer: A

 

NEW QUESTION 22
A backup administrator needs to implement BoostFS for Windows.
What do they need to install on the Windows server? (Choose all that apply.)

  • A. CBFS
  • B. CIFS
  • C. NFS
  • D. FUSE

Answer: B,C

Explanation:
For CIFS/NFS/DD BoostFS, the first consideration to address is what level of CIFS, NFS and DD BoostFS sharing is wanted for the DD series appliances.

 

NEW QUESTION 23
What system role is required to create the second security officer for a PowerProtect DD?

  • A. security officer
  • B. admin
  • C. sysadmin
  • D. limited-admin

Answer: A

Explanation:
A security role user, who may be referred to as a security officer, can manage other security officers, authorize procedures that require security officer approval, and perform all tasks supported for user-role users.

 

NEW QUESTION 24
What are the steps to configure the Retention Lock Compliance?

Answer:

Explanation:

 

NEW QUESTION 25
What happens to the data when it is moved from the active tier to cloud tier?

  • A. It is deduplicated and stored in a file system in the native format
  • B. It is compressed and stored as object storage in a new format
  • C. It is deduplicated and stored in object storage in the native format
  • D. It is compressed and stored in block storage in a new format

Answer: A

Explanation:
Every file has a meta-data. Meta-data of the files which is getting moved is stored on active tier and data and metadata is moved into the cloud. There is no multiple data-movement policy set on single mtree. Data moved to particular cloud unit depends on datamovement policy. And only the unique data is sent to the cloud. This is done using the deduplication.

 

NEW QUESTION 26
Which protocol is used for communications between a PowerProtect DD appliance and cloud tier to Dell EMC ECS?

  • A. SSL
  • B. HTTP
  • C. FTP
  • D. SSH

Answer: B

 

NEW QUESTION 27
Which DDOS role is used for scheduling and running the backup application in a secure multi-tenancy environment?

  • A. Tenant User
  • B. Security Officer
  • C. Admin
  • D. Tenant Admin

Answer: C

 

NEW QUESTION 28
What is a main advantage of using DD Boost instead of CIFS or NFS for a backup?

  • A. Deduplication is distributed between the backup server and client
  • B. DD Boost does not require administration credentials
  • C. DD Boost uses integrated network acceleration
  • D. No requirement for an IP network to back up data

Answer: A

Explanation:
Dell EMC Data Domain Boost software distributes parts of the deduplication process to the backup server(s) or application client(s), leaving the Data Domain system, powered by Intel® Xeon® processors, to focus its energy on determining what is unique and writing the new data to disk. With DD Boost, only the unique data has to travel from the backup server or client to the Data Domain system. DD Boost also gives the backup application control over replication

 

NEW QUESTION 29
Which component of PowerProtect DD is Data Invulnerability Architecture a feature of?

  • A. CIFS
  • B. DD Boost
  • C. VTL
  • D. DDOS

Answer: D

Explanation:
The Data Invulnerability Architecture is built into DDOS and DD series to provide the industry's best defense against data loss.

 

NEW QUESTION 30
A backup administrator is tasked with verifying the compression savings of a PowerProtect DD9900.
Which compression algorithm will they see enabled by default?

  • A. lz
  • B. gzfast
  • C. lzw
  • D. gz

Answer: B

Explanation:
The gzfast compression algorithm is the default local compression method used on all DD6900, DD9400, and DD9900 appliances.

 

NEW QUESTION 31
Which protocol is used with Dell EMC Cloud Tier to transfer data between a PowerProtect DD appliance and the cloud?

  • A. HTTPS
  • B. NFS
  • C. SFTP
  • D. FTP

Answer: B

Explanation:
A DD series appliance at a Faction data center can be used as single backup target to protect workloads across multiple clouds. Using DD Boost, CIFS, and NFS protocols.

 

NEW QUESTION 32
An administrator has retained snapshots for a single MTree and is trying to create a new one. An error message is received.
What is the reason for the failure?

  • A. There are not enough snapshot licenses
  • B. The DDOS needs to be upgraded
  • C. The user does not have the permission to retain more snapshots
  • D. The maximum number of snapshots has been exceeded

Answer: D

Explanation:
Note: To identify an MTree that is nearing the maximum number of snapshots, check the Snapshots panel of the MTree page regarding viewing MTree snapshot information.

 

NEW QUESTION 33
How can remote logging with a syslog server be configured on a PowerProtect DD system?

  • A. Use the DDMC to enable the remote logging
  • B. Use the DDSM to enable the remote logging
  • C. Remote logging is enabled by default
  • D. Use the CLI command log host enable

Answer: D

 

NEW QUESTION 34
How many hops should the fabric configuration be limited to when implementing the DD VTL?

  • A. 4 hops
  • B. 2 hops
  • C. 1 hop
  • D. 3 hops

Answer: B

 

NEW QUESTION 35
Which PowerProtect DD technology provides fast and efficient deduplication while minimizing disk access?

  • A. Cloud Tier
  • B. DIA
  • C. Cache Tier
  • D. SISL

Answer: A

 

NEW QUESTION 36
Which NDMP device is supported on a PowerProtect DD appliance?

  • A. CIFS
  • B. DD Boost
  • C. NFS
  • D. VTL

Answer: D

Explanation:
A system can present itself as a file server, offering NFS, CIFS access over Ethernet; as a virtual tape library (VTL) over Fibre Channel; as an NDMP tape server over Ethernet; or as a disk target using application specific interfaces like DD Boost. DD VTL is qualified with leading open systems and IBMi enterprise backup applications.

 

NEW QUESTION 37
What are some key benefits of performing backups and recoveries with a PowerProtect DD appliance?

  • A. Increase in the overall size and scope
    Elimination of physical tape
    Number of copies that do not need to be tracked
    Increased speed of disaster recovery
  • B. Increase in the overall size and scope
    Elimination of physical tape
    Fewer copies that need to be tracked
    Increased speed of disaster recovery
  • C. Reduction in the overall size and scope
    Elimination of physical tape
    Fewer copies that need to be tracked
    Increased speed of disaster recovery
  • D. Reduction in the overall size and scope
    Elimination of physical tape
    Number of copies that do not need to be tracked
    Increased speed of disaster recovery

Answer: B

 

NEW QUESTION 38
A Spectrum Protect administrator is configuring VTL on PowerProtect DD.
Which tape driver type should they select?

  • A. L180
  • B. L6000
  • C. L2000
  • D. TS3500

Answer: D

 

NEW QUESTION 39
Which statement is correct regarding backup flow without PowerProtect DD?

  • A. Only backup clients connect directly to tapes and save the backup
  • B. Both the backup server and backup clients connect directly to tapes and save the backup
  • C. Only the backup server connects directly to tapes and saves the backup
  • D. Data is replicated between primary storage and tape storage

Answer: C

 

NEW QUESTION 40
......

Download Free EMC DES-DD33 Real Exam Questions: https://examsboost.actualpdf.com/DES-DD33-real-questions.html